Home > Products > CAT
Products
CAT - Process Chamber Assurance Tool
 
Dedicated to improving Process Performance.

Designed to test pressure sensors, mass flow controllers, pump performance, and chamber integrity.


Signatone Chamber Assurance Tool
Chamber Assurance Tool
Click to Enlarge
 
 

澳洲幸运10开奖软件下载

  • Performance monitoring of process tool components to prevent unscheduled down time and maintenance
  • Fingerprinting of high yield process tools for system matching with like tools
  • Brining new and down systems online and into specification
  • Baselining tools before starting a run
 
 

澳洲幸运10龙虎走势图

  • A small foot print for easy maneuverability around the fab
  • NIST traceable independent reference which may easily be moved from one tool to another
  • Windows based easy to use graphical software
  • Four security levels of operators allowing administrators and engineers to design test and operators to run the test unassisted
  • IN-SITU analysis meaning that the tools are tested in their actual running environment with all the system sensors, MFCs and electronics in place
  • Pressure sensor noise, quality, calibration and zeroing test
  • Pump speed, speed at a given pressure and time to base test
  • Volume measurement, leak-up rate
  • Mass Flow Controller linearity, gain and offset over a defined range
  • MFC setpoint performance tests mean flow, time to control, control deviation, maximum flow, and rate of rise
  • Residual Gas Analysis (optional)
 
 

澳洲幸运10开奖软件

澳洲幸运10走势

The control software operates under Windows 95 (or Windows98). Cue cards and help screens navigate operators through the test procedures making testing a simple operation. A great deal of flexibility allows engineers to design the full array of test or focus on one area of concern.

澳洲幸运10官方开奖直播

The CAT software features four levels of security. Operators may run all of the configured test. Service security level users may run tests and view configurations to assure the CAT is working properly. Engineer level users may define the test specifications for each process tool and components. Finally, the owner has full access to all controls including defining the security levels of the other users.
CAT Software
CAT Software
Click to Enlarge

澳洲幸运10历史记录

The status view displays the active system with the components presently under test. Graphic representations of gas flows and valves opening provide a birds eye view of the overall configuration. Setting up configurations for multiple process chambers is made simple by the pre-loaded defaults and copy configuration features. Each CAT system comes pre-loaded with factory specifications for most MFCs and manometer types. Selecting the model number automatically loads the default settings. Also, once a process system's configuration is completed, copying the configuration for like process systems is just a couple of mouse clicks away.

澳洲幸运10线上投注

The CAT has four swivel wheels t assure easy movement into corners and narrow race ways. The small foot print of 20" by 24" adds to maneuverability. A utility drawer provides a great place for storing cables, adapters and spare components. A retractable power cord and flexcoil reference connections prevent unwanted cables dragging behind when moving from process. Stainless steel skins ensure class 1 clean room compliance.
 
 

澳洲幸运10全天计划

  • Pressure Sensor Zero Offset to within 1 mTorr
  • Pressure Sensor Slope Errors to within +0.5%
  • Pressure Sensor Linearity Deviation to within 2 mTorr

澳洲幸运10开奖号

  • Actual Rate of Rise to better than 1 mTorr/minute

澳洲幸运10开奖网

  • Measurement of pumping speed over a user defined range
  • Defined pump-down to target within 1 second
  • Base pressure to within 1 mTorr

澳洲幸运10结果走势图

  • Average Flow rate to within +0.5% FSR
  • Time to come into controlled flow to within 1 second
  • RMS deviation from average flow rate
  • Graphical display of real time flow information & analysis
  • Zero offset to <+0.5% FSR
  • Gain to <0.5% FSR
  • Linearity to <0.5% FSR

澳洲幸运10最准的计划

  • Repeatability is better than 1% (typically 0.1%). Test results are correctly compensated for system temperature and leak rate where applicable
  • Depending on the configuration, the CAT will characterize equipment from 1x10-4 Torr to 100 Torr
  • Dimensions: which 29.25",depth 26", height 52"
 
 
 
 
Probe Card Order form
Epoxy Probe Order Form
Blade Arm Order Form
Accessories Order Form
Semiconductor Wafer Probing Order Form
 
Call for Probe Cards
 
     
 
Home | About Us | Products | Services | New Technology | Contact Us
© 2014 All Rights Reserved.
Designed by 
 
   
SG赛车冷热号统计 澳洲幸运5基本走势图 极速飞艇开奖软件下载 澳洲幸运10在线预测 澳洲幸运5开奖号码记录 极速飞艇开奖号码